救生艇操作说明

救生艇操作说明

Operation manual for lifeboat

一． 救生艇释放操作规程

LAUNCH PROCEDURE OF LIFE BOAT

1.解开救生艇的捆绑钢丝，拔掉充电电源

Remove lashings and electrical supply.

2.人员登艇

Embarkation.

3.坐好位置，系好安全带

Take seated positions and secure seat belt.

4.确保救生艇内没有松动的物品

Ensure no loose or movable objects in boat.

5.关闭救生艇门窗

Secure hatches.

6.去掉安全栓的保险插销，向上拉开安全栓再向前推

Remove red safety pin on safety lever, and lift safety lever up and forward.

7.启动引擎

Start engine.

8.确定救生艇下方水面无障碍物

Ensure clear landing area.

9.逆时针操作主释放装置盘，直到救生艇脱钩.

Turn main release anti-clockwise ,until hook is open and boat is released.

10.驶离大船。

Steer away. 二 .使用吊臂放艇步骤 Procedure for launch life boat by davit.

首先按下液压电源，启动动力装置。

Switch on the power of hydraulic pump.

1. 解开小艇顶部及尾部的绑扎绳。

Remove the lashes and secures.

2. 用LEVER A控制杆控制横向吊钩，使之与小艇的吊环连接，然后絞紧

Operate lever A, connect the hook and the ring of life boat, make it tight.

3. 用LEVER A控制杆使小艇沿着滑道下滑，直到小艇的前部超过滑道的末端。

Operate lever A, let the boat slid downward , until the bow of the boat go out of the davit.

4. LEVER B控制杆控制吊臂甩出，直到最大限度。

Operate lever B , make the davit move outbound, until the max angle.

5. 用LEVER A控制杆控制吊艇钢丝使小艇下降。

第1页下一页